|
|
|
|
|
|
|
|
| Specification |
- Flow: Maximum up to 16m3/min
- Head: Maximum up to 140m
- HP: 1 to 250 HP
- Impeller: enclosed type
- Flange: Standards of JIS 10K RF
- Shaft seal: Gland packing, mechanical seal, cartridge type mechanical seal
- Bearing bracket: Standard type (maintenance free greased bearing with anti-dust cover)
Heavy-duty type ( Oil-lubrication angular contact bearings + labyrinth seal)
- Material:FC200 cast iron, 304/316/316L stainless steel, monel alloy
|
 |
| Applications |
- Process Pump
- Petrochemical industry, textile dyeing and finishing industry, food industry, chemical industry, general factory water supply, high-rise water supply, cooling water, circulating water, sewage treatment and highly alkaline and acid corrosion liquids, high temperature high pressure liquids, and all other special liquids may be used.
|
|
| Features |
- Performance satisfactory to ISO 2858 /EN22858 requirement .
- Design dimensions comply with DIN 24255/EN733 regulations.
- Casing 3.2mm corrosion tolerance, providing excellent durability.
- Back-pull-out design, providing rapid and simple disassembly and re-assembly.
- End suction, centerline discharge, providing the best pipe support ability.
- Dynamic balanced impeller, providing steady and quiet operation
- Supports API vibration regulation and shaft seal flushing plans.
- Provides reinforced edition for heavy-duty operation
|
|
| Optional accessories |
- 3-Phase induction motor: 208~480V 60/50Hz
- Butt joint flange
|
| Specification |
- Flow: Up to 1.6 m3/min
- Pressure: Up to 30 kg/cm2
- HP: 1~75 HP
- Liquid temperature: 0℃~150℃
- Liquid viscosity: 1 cp ~ 500,000 cp
- Shaft seal: Gland packing, mechanical seal
- Bearing bracket: Standard full close type
- Transmission: Belt driven
|
|
| Applications |
- Food industry: syrup, spices, jam, milk, cream, and other viscous drinks, etc.
- Petrochemical industry: Lubricating grease, heavy oil and asphalt
- Chemical products: Acetone, Ethyl alcohol, gelatin and DOP
- Drugs: Carbon dioxide, benzene and chloride
- Plastic and synthetic resin: styrene, plasticizer
- Coating industry: Coating material, ceramic paint and regular paint
- Textile industry: Conveyance of synthetic fiber materials
|
|
| Features |
- Inside connection type gear structure, gear style of optimized design, least wear, low noise.
- Belt transmission, using pulley to reduce rotating speed, suitable for high-viscosity liquid
- Simplified construction, easy disassembly of side cover of pump, accessible for routine maintenance
- Axial clearance of driving gear can be adjusted on exterior, without having to disassemble the pump
- Super powerful suction force, maximum up to 740mmHgG(20Torr)
- May install casing steam jacket
- May choose built-in safety valve, to prevent damage in case of overloaded pump
- May adopt internal gear external shaft design in conveyance of liquid containing fine solid particles
|
|
| Optional accessories |
- 3-Phase induction motor: 208~480V 60/50Hz
- Butt joint flange
- Motor speed reducer
- Motor speed changer
- Pressure gauge
- Composite gauge
|
|
|
|
|
|
|
|
|
